Horizontal 37kw 3200r/Min Drilling Mud Centrifuge 2205 two-way stainless steel material Frequency converter

Working principle
The basic principle is the drum and the spiral feeder rotate in the same direction but with a certain speed difference: The material is led into the feeding spiral inner cylinder via the feeding pipe and after speeding up, enters the drum: Under the action of the centrifuge force field, the relatively heavier solid-phase material deposits on the drum wall forming the residue layer: The solid-phase residue is continuously pushed by the spiral feeder to the conic end of the drum and after dehydration in the drying area, is discharged under full-speed running.
 
Characterstics of Our Drilling Decanter Centrifuge

1. Drum assembly is protected with demountable support frame in transit, preventing damage to bearing; 
2. Straight and cone section of the drum are made from 2205 duplex stainless steel material, adopt centrifugal casting process;
3. Remaining components of the drum assembly are made from SS316L;
4. Screw carrier adopts YG6 wear-resistant alloy sheet protection. With long life, easy maintenance and replacement;
5.  Diversion port of screw pusher and slag-drip opening of the drum are protected by replaceable wear-resistant alloy sleeve, delaying the service life and maintenance cycle.
6.  Using imported SKF and NSK bearings to improve equipment stability and bearing life;
7.  Frequency control facilitates customers to adjust speed at any time, meeting different working conditions;
8.  Schneider or Siemens electrical components. Current overload & mechanical limit switch dual protections.

 
Main Specification of TRLW Series Decanting Centrifuge